Services

Hot Oil & Pressure Applications

Hot Oil & Pressure Applications
  • Hot oiling
  • Pressure testing pipelines and tubing
  • Tank heating (water, oil and frac fluids)
  • Paraffin removal
  • Pipeline flushing
  • Liner sets

Hot Oiler Units

Hot Oiler Unit
  • 5 and 7 million BTU burner
  • Temperature rise of 100F at 110 GPM
  • Capable pressures of 70 MPA
  • Triplex pump capable of 1,000 LPM
  • Mission pump at a rate of 1514 LPM
  • 8,000 litre sour sealed compartment
  • 2,000 litre fuel compartment
  • Third compartment for chemical hauling & pill mixing

Super Heater

Super Heater
  • Propane burners with a propane pre-heater and propane pump rated from 21 to 30 million BTU
  • Burner controls with manual burner operation and total safety system with high temperature shut-downs; The burner has a fire rod propane sensor to kill the burner fuel in case of low fuel pressure or flame out
  • High temperature shut-down as well as an ESD in case of emergency
  • Hydraulically powered variable speed Durco centrifugal charge pumps to feed the heat exchanger; Pumps are 4" x 3" with a 12" impellor and 5" x 4" with a 14" impellor
  • Two each 4" suction connections located on each side of trailer
  • two each 3" discharge connections located on each side of trailer

Truck Mounted Units

Truck Mounted Unit
  • 2 million BTU capable burners
  • Pump pressure ranges from 2,600 to 3400 psi
  • Water capacity from 800 to 2,000 gallons
  • Dry and wet steam
  • Glysol heat equipped
  • Roughneck 7 pass water heater
  • Completely self contained

Truck Trailer Units

Truck Trailer Units
  • Burners capability range from 850,000 to 1.7 million BTU
  • Pump pressure to 3,600 psi
  • 600 gallon water capacity
  • Dry and wet steam
  • Glysol heat equipped
  • Roughneck 7 pass water heater
  • Completely self contained